Call_No.:

• PE1475.S25 1994

• Helping Researchers Write..So Managers can Understand. 2nd.ed.

• Sageev, Pneena P.

• Columbus : Battelle Press

• Main Problems in Researchers' Technical-Business Writing / Steps Researchers Can Take / Steps Managers Can Take / Results to Expect / Developing Writing Improvement Programs for R&D Organizations / Outlook: Trends in Improving Researchers' Technical-Business Writing / Survey Results and Interpretation

Call_No.:

• QA276.P25 1953

• Statistics for Technologists

• Paradine, Charles George

• London, English Universities Press

• Introductory / Frequency Distributions, Statistical Parameters / Probability, The Binomial Distribution / Poisson's Distribution, The Normal Distribution / Sum of Squares of Normal Variates. Goodness of Fit / Small Samples, Student's t. Variance Ratio / Quality Control Sampling Inspection Schemes / Theory of Errors / The Method of Leats Squares / Correlation the Analysis of Variance / The Principle of Maximum Linklihood, Probit Analysis / Table / Answers to the Examples

Call_No.:

• QA276.Y6 1951

• Statistical Methods for Chemists

• Youden, William John

• New York, Wiley

• Precision and Accuracy / The Measurement of Precision / The Comparison of Averages / The Resolution of Errors / Statistics of the Straight Line / The Analysis of Avriance / Interaction Between Factors / Requirements for Data / Arrangements for Improving Precision / Experiments with Several Factors

Call_No.:

• QC151.C64 1961

• Flow of Fluids Through Porous Materials

• Collins, Royal Eugene

• New York, Reinhold Pub. Corp.

• Structure and Properties of Porous Materials / Statics of Fluids in Porous Media / Physical and Mathematical Theory of Flow / Steady Laminar Flow of Homogeneous Fluids / Transient Laminar Flow of Homogeneous Fluids / Simultaneous Flow of Immiscible Fluids / Moving Boundary Problems; Displacement' Deposition of Solids / Simultaneous Laminar Flow of Miscible Fluids / Theory of Models / Flow with Change of Phase

Call_No.:

• QD65.B29 1971

• A Statistical Manual for Chemists 2d ed.

• Bauer, Edward L.

• New York, Academic Press

• Fundamentals / The Average / Experimental Design and the Analysis of Variance / The Comparison of Two Averages / Analysis of Variance by Range / Control Charts / Correlated Variables / Sampling / Control of Routine Analysis

Call_No.:

• QL668.C247.B3 1989

• Morphology of Cellulose

• Gardiner, Eric Stanley

• University Microfilms International

• Crystal Structures of Cellulose IV / Morphological Changes in a CTA Hollow Fibeer Membrane Subject ot Stress and Fouling / The Morphology and Interaction of Cellulose Acetate-Polystyrene Phosphonate Bleands in Thin Films and Ultra-thin Deposits

Call_No.:

• SD536.C67 1976

• Wood Structure and Identification

• Core, H. A.

• Syracuse, N.Y. : Syracuse University Press

• Moisture, Shrinkage, and Porosity / Cell-Wall Structure / Permeability / Capillarity / Thermal Conductivity / Moisture Movement Below the Fiber Saturation Point and the Boiling Point / Unsteady-State Transport

Call_No.:

• TA418.7.A45 1967

• Adhesion or Cold Welding of Materials in Space Environments

• A S T M

• Philadelphia, American Society for Testing and Materials

• Introduction / Some Aspects of the Surface Chemistry of Adhesion and of Friction / Clean Surfaces, Their Preparation and Characterization / Atomic Surface Structure of the Common Transition Metals and the Effect of Adhesion as Seen by Field Ion Microscopy / Space Simulation testing of the Adhesion of Materials / Adhesion of Metals in High Vacuum / Definition and Evaluation of Parameters Which Influence the Adhesion of Females / Flight Reactor Materials Development , Self-Weld Studies / The Analysis of Metallic Adhesion Data / Cold Welding of Copper Under Ultrahigh Vacuum Formed Silicate Surfaces in Relation to the Moon / The Influence of Crystal Structure, Orientation and Solubility on the Adhesion and Sliding of Various Metal Single Crystals in Vacuum / A Statistical Method for the Study of Friction and Wear in Vacuum / The Contribution of Sputtering to our Knowledge of Plasma-Surface Interactions / The Problems of Engineering Testing for Cold Welding / Solid-Phase Joining of 99.8 Per Cent Iron / Friction of Tungsten Disulfide Sliding in an Ultrahigh Vacuum

Call_No.:

• TA418.9.C6 C5 1979

• Mechanics of Composite Materials

• Chrstensen, Richard M.

• New York : Wiley

• Some Elements of Mechanics / Effective Moduli: Spherical Inclusions / Effective Moduli: cylindrical and Lamellar Systems / Bounds on Effective Moduli and Further Results / Laminates / Analysis, Strength, and Design / Wave Propagation / Inelastic and Nonlinear Effets / Effective Thermal Properties

Call_No.:

• TA419.S425 1971

• Flow in Wood 1st. Ed.

• Siau, John F.

• Syracuse, N.Y. Syracuse University Press

• Moisture, Shrinkage, Nd Porosity / Cell-Wall Structure / Permability / Capillarity / Thermal Conductivity / Moisture Movement Below the Fiber Saturation Point and the Boiling Point / Unsteady-State Transport

Call_No.:

• TA419.T45 1972

• Theory and Design of wood and Fiber Composite Materials 1st. Ed.

• Benjamin A. Jayne

• Syracuse, N.Y. Syracuse University Press

• Composite Materials: Ageneral Overview / Orthotropic Elasticity / Mechanical Behavior of the Molecular Components of Fibers / Elastic Behavior of the Wood Fiber / On the Mechanical Response of Materials with Cellular and Finely Layered Internal Structure / Acomprehensive View of the Structure fo Paper / The Influence of Nonrandom Fiber Orientation and Othe Fiber and Web Parameters on the Tensile Strength of Nonwoven Fibrous Webs / Lage Strains and Inelastic Behavior of Paper / Internal Structure of Fiberboard and Its Relation to Mechanical Properties / Application of Finite-Element methods for Analysis of Composites / Finite-Element Analysis of Flakeboard / Binder-Fiber Interactions in Nonwovens / Mechanical Behavior of Nonwoven Systems / Mechanical Behavior of Two-Phase Media / Reinforcement of Polymeric Systems with Douglas-fir Bark Fibers

Call_No.:

• TA455.A34 T4 1974

• Testing of Adhesives : A Project of the Adhesives Testing Committee

• Meese, R. Gregory

• Atlanta : Technical Association of the Pulp and Paper Industry

• Starch and Dextrin Adhesives / Casein Adhesives / Animal Glue Adhesives / Sodium Silicate Adhesives / Polyviny1 Actate Emulsion Based Adhesives / Polyviny1 Alcohol Adhesives / Lacquer Ahesives / Hot Melt Adhesives / Latex-Baseddhesives / Remoistenable Adhesive Products / Foil Laminating Adhesives / Pressure-Sensitive Adhesive / Tack Testing

Call_No.:

• TK9400.R6 1959

• Radioistopes for Industry

• Rochlin, Robert S.

• New York, reinhold

• Introduction / Gaging Without Contact / radiography and Autoradiography / Wear Measurement / Activation Techniques / Using Tracers in Research and Development / using Radioisotopes in Manufacturing / Finding leaks with radioisotopes / Miscellaneous Applications / Equipment, facilities and Training Protection From Radiation Hazards / Present Trends and Future Posibilities

Call_No.:

• TP899.P3.I58 1998 V.1

• International Environmental Conference & Exhibit: April 5-8, 1998, Vancouver Trade & Convention Center

• Technical Association of the Pulp and Paper Industry

• TAPPI Press, Atlanta, GA.

• Value-Added Wood Processing Opportunities: Increasing the Benefits Communities Receive from the Forests in British Columbia / Benchmarking Sustainable Forest Management Performance Through Voluntary Certification Systems / Evaluation of the Performance of a Pulp and Paper Mill Sludge Landfill Final Cover System / Final Closure of a Paper Mill Landfill Using Water Balance Design Concepts and Primary Clarifier Sludge as Final Cover / Closure of Surface Impoundment / Best Management Practices as an Element of an Integrated Kraft Mill's Environmental Management System / Experience at 100% Substitution Bleaching and and the Cluster Rule / Effects of Washer Efficiency on Characteristics of Effluents from D(EPO)D Bleaching of a Softwood Kraft Pulp / Trace Nutrients for Enhanced Activated Sludge Settleability / Phosphorus Control and Reduction at a Corrugating Medium Mill / Demonstration of the Optimum Level of Phosphorus Addition for Operation of Aeration Stabilization Basins / Diagnosis of the Non-Condensible Gasf Collection System Operation / Louisiana-Pacific: Approaching the Odor Free Kraft Mill / Incinerating NCG in Recovery Boilers / A Database for Voc Emission Prediction in Kraft Mills / Aquatic Toxicity and Degradation Products of Some Dithiocarbamate Biocides / Detoxification of Extractive Constituents in Pine Wood by Sapstain Fungi / Biofiltration of Mixtures of Volatile Organic Compounds Emitted From Pulp and Paper Industries / The Use of Aquanox Advance Waste Water Screenig Technology for Rapid Analysis in the Pulp and Paper Industry / The Use of a Magnetic Device to Eliminate Hared Calcium Scale Formation / Using the Internet as a Regulatory information and Environmental Management Tool to Enhance Environmental Management System / Photoactive Ion Exchange Resins / RTO Field Experience: Control of Air Emissions from OSB, MDF, Particleboard, Hardboard and Ply wood Venneer Dryers and Presses / Effects of Water Chemistry on Flocculant Makedown and Subsequent Retention and Drainage Performance / Global Warming Climate Change Issues (Pane Discussion) / Implications of the Greenhouse Gas Issue for Canada's Pulp and Paper Industry / Energy Efficiency in the U.S. Pulp and Paper Industry - Impacts on Greenhouse Gas Emissions / Will Global Climate Change Global Competitiveness / Implications of Carbon Dioxide Emissions and Climate Policies for Forest Management / Effluent-Free Drum Debarking / Ranking Pulp and Paper Mill Fresh Water Use Rate Relative to Similar North American Mills / A Systems Approach to System Closure in Integrated Newsprint Mills / Application of Tailored Minerals to the Removal of Dehydroabietic Acid from a Model Whitewater / Technical and Economic Feasibility Assessment of Metals Reduction in Pulp and Paper Mill Wastewaters / Upgrade of Specialty Paper Manufacturing Wastewater Treatment Facility / Integration of Flotation-Ultrafiltration for Treatment of Bleached Pulp Effluent / PM2.5: can We Make the Grade / Characterizing Polycyclic Aromatic Hydrocarbon Emissions from Hog Fuel Boilers / Evaluation fo the US EPA Recommended Approach to Predicting Air Emissions from Pulp and Paper Industry Landfills / Predictive Emission Model (PEMS) for Lime Kiln Particulate, TRS, SO2, Nox and Co / Implementation of a PC Based Data Acquisition System for Continuous Emission Monitoring / Practical Experience Using Information Technology to Develop a Best Practice for Discharge Monitoring Reporting / Custom Developed Environmental Data Mangement System for Emission Factor and Source Test Referencing / Residuals Management Committee Meeting: Recycle Market Development Panel Discussion / Groundwater Monitoring Strategies in a Complex Hydrogeologic System for a Closed Solid Waste Landfill / Cost-Effective Landfill Monitoring / Compounds Contributing to Odours from Pulp and Paper Mill Biosolids / Sludge Dewatering Process Optimization - Cost Reduction at an Integrated Pulp and Paper Mill / Effcect of Initial Solids and Polymer Dosage on the Efficiency of Impulse Drying Sludge / Process Optimization of an Activated Sludge System Treating High-Strength Pulp Mill wastewater Using a Biological Selector / Control fo the Activated Sludge Treatment Process / History of Effluent Treatment a Longview Fibre Company / Alkypphenol Ethoxylate Surfactants: A Critical review of the Science / Analytical Issuer Associated with Application of EPA's Proposed 1600 Series Trace Metals Methods to Pulp and Paper Effluents / Environmental Aspects of Alcohol Ethoxylates in Pulp and Paper Mill: Part 1. Surfactant Chemical Structure Effects

Call_No.:

• TP899.P3.I58 1998 V.2

• International Environmental Conference & Exhibit: April 5-8, 1998, Vancouver Trade & Convention Center

• Technical Association of the Pulp and Paper Industry

• TAPPI Press, Atlanta, GA.

• Production of Liquid Methanol from Foul Condensate Stripping Systems / Stand-Alone Biological Treatment of Kraft Mill Condensates - Pilot Plant Studies / Anaerobic Treatment of Kraft Foul Condensates / Solid and Engineered Wood Ad Hoc Committee Meeting / Hyperspectral Remote Sensing as a Management Tool for al Land Application Program / Land Application of Mechanical Pulp Mill Sludges in Alberta: Research and Operational Activities / Use of Primary Clarifier Fibre as a Mulch in the Forest plantation: Four Year Study / Permitting, Startup, and Repermitting of the Wood Waste CoGeneration Boiler at Kimberly-Clark, Everett, Washington / New Source Permitting and the Conversion of a Kraft Recovery Furnace to a Multi-Fuel Power Boiler / Understanding Climate Chage Issues and How They Could Affect the Forest Industry and Its Companies / Drip Irrigation Design for a Hybrid Poplar Plantation / Time-Critical Assessment of Environmental Liabilities aSSociated with a Large-Scale Timberlands Property Transfer / Stakeholder Involvement in Watershed - Based Permitting: The Penobscot River Example / Physicochemical Characteristics of Dissolved Organic Matter in Untreated and Treated Pulp and Paper Mill Wastewaters / Development of Groundwater Monitoring Requirements for Alberta Kraft Pulp Mills / Environmental Cost Accounting in the Forest Products Industry( Panel Discussion) / Risk Sharing Expedites and Reduces Cost for Site Closure: utilizing Probability Analysis, Lump Sum Agreement, and Proactive Technical and Regulatory Strategies Creates Teaming Between Owner and Consultant / Status and Application of Biocriteria / Dynamic Behavior of Biofilters Degrading Pulping Odors and Vocs: Hydrogen Sulfide / Use of a Microbial Biostimulant ot Stabilize and Reduce Effluent TSS and COD, even with Higher BOD Loading / Development of Acceptable Sulfide Concentrations in Waste / An Updated Approach for Major Source Air Permit Modeling / Improvements in TRS Monitoring / EMSoft 2000: An Information System for Knowledge Integration / Bioaugmentation Dosage Optimization Utilizing On-Site Cultivation / Wood Products MACT Panel / Closing a Landfill: A Case Study / Enhanced Fuel Oil Recovery Using Steam injection and Dual Phase Vacuum Extraction at a Paper Recycling Facility in Dublin, Georgia / Old Contamination, New Regulations, Close Cooperation, and Recent Remediation at a Chicago Lumberyard Brownfield Success / Energy valua From Waste Paper Mill Screen Rejects / GrayLime: Development of and Environmentally Useful Co-Product Reuse Program / Product from Residue: Standard Seting for Alkaline Mill residues in Quebec / Improving Treatment Performance with " Natural" Bioaugmentation / Use of a Slime Porducing Microorganism to Enhance Biomass Settleability In Activated Sludge and ASB Systems / Reduced Biomass Production using Acid Effluent from a Kraft Bleachplant / Risk Management Planing; Option Out Through Chemical Substitution Or Minimizing Off-Site Impacts Through Mitigation Systems / Hazard Assessment and Off-Site Consequence Analysis for a NSSC Pulp Mill Risk Management Plan / Consequence Analysis for Chlorine Dioxide Accidental Releases / Conducting Environmental Management System Reviews for the Forest Products Industry Using ISO 14000 Standards / Building on Current Peocesses and Employee Knowledge to Develop an ISO 14001-Compatible EMS / The Environmental Profile Data Sheet for Pulp and Paper Products / Implementation of and Odor Control Gas Collection system on an Active Pulp and Paper Mill, Landfill / Management of Sludge Landfill Stability During Excessive Rainfall Conditions / A Model Approach for Corporate-Wide Development of Risk Management Plans for Kraft Pulp Mills Under EPA's Risk Management Program Rule / Using Existing Mill Plans to Achieve Cost Effective Compliance with EPA's Risk Mangement Plan Rule, Meet Ongoing PSM Requirements and Draft an Integrated Contingency Plan Regions of the World Environmental Requirements Evolutionary Perspective / Recycling of the World Environmental Requirements Evolutionary Perspective / Recycling of ECF Bleaching Plant Effluents Cleaned by coagulation-Flocculation / Mill Experience with the Elimination of Sodium Hypochlorite Bleach / Environmental Improvement of Air Emissions / Water Quality Committee Meeting / Evaluationa dn Experience with the use of a Combined Impinger and Canister Method for the Measurement of HAP Emissions from Wood Products Industry Sources / Preliminary Results from Laboratory and Field Studies of Total Hydrocarbon (VOC) Analyzers and Discussion of the Application of Method 25A Measurement Systems to Wood Products Sourcess / Invincible Condensables: Conquered in RTO Control of Veneer Dryer Emissions / Air Emissions Assessment for a New Oriented Stand Board Plant

Call_No.:

• TP899.P3.I58 1998 V.3

• International Environmental Conference & Exhibit: April 5-8, 1998, Vancouver Trade & Convention Center

• Technical Association of the Pulp and Paper Industry

• TAPPI Press, Atlanta, GA.

• Costs Associated with Implementation of Zero Effluent Discharge at Recycled Fiber Paperboard Mills / Improvement of Microbiological Control in Closed Water Systems for the Paper and Board Industry / Water Reuse in the Pulp and Paper Industry: Evaluation of Four Microfiltration Applications / water Reclamation Operations in a Zero Effluent Mill Use of Chlorine Dioxide for the Bleaching of Pulp; A Re-Evaluation of Ecological Risks Based on Scientific Progress Since 1993 / Pre paring for Cycle Two of Aquatic Environmental Effects Monitoring (EEM) at a Candian Mill / Organic Discharges from the Manufacture of Bleached Kraft Pulp: Molecular Properties and Environmental / A Summary of Pulp and Pare Mill Experiences with Toxicity Reduction and Toxicity Identification Evaluations (TRE/TIE) / Changing Perceptions of the Paper Industry at the Grade School Level / Building Community Awareness- The Upstate Paper Association / The Environmental Challenge: Public Awareness / The Conversion of the FPPAEA Environmental Awareness Training Program to Computer-Based Training / Wverview of Industries of the Future and Forest Products Industry's Agenda 2020 / Studies of Chlorine Dioxide Delignification: Vapor Phase Bleaching of Hardwood and Soft wood Kraft Pulps / An Investigation into the Use of Low Temperature Catalytic Oxidation for the Control of Volatile Organic Compounds Released from forest Product Industry Operations / VOV Emission Models: Tuning and Validation Using Data from an ECF Kraft Mill / Air Committee Meeting: Issues Panel / New Perspective on RI/FS process for Brownfield Redevelopment: Case Study at Former Oregon Sawmill / Cost-Effective Management of the RCRA Corrective Action Process / Beneficial Use of Pulp and Paper Residues for Soil Amendment in the Province of Quebec / Control of Filamentous Bulking and Oxygen Transfer in a Pulp and Paper Sequential Batch Reactor (SBR) / Feasibility Study of Thermophilic Aerobic Biological Treatment of Bleached Kraft Pulp Mill Effluent / Sulphur Addition ot Control Dioxins Formation in Salt-Laden Power Boilers / Thermodynamic Study of Calcium Based Sulfur Recovery for Kraft Black Liquor Gasification / Using Environmental Parameters to Optimize Process Operation / Toward Effluent Compliance in China / Chloride Removal from Kraft Liquors Using Ion Exchange Technology / The Importance of Public and Private Partnerships in Pollution Prevention / contractors Impacts on a Company's Regulatory Compliance Status / Making Better Decisions for Environmental Issues / The Screening Level Risk Assessment: A Cost-Effective Tool to Risk and Hazard Identification for the Chemical Handling systems of a Pulp and Paper Mill-A Case History / Air and Effluent Quality Improvements through Condensate Stripping / Environmental Aspects of Pulp Washing / The Investigation of Regenerative Thermal Oxidation for Control of Pulp Mill VOC Emissions and Sludge Dryer Odor / Evaporation of Acidic Effluent from ECF Bleaching: Pilot Tests / Sodium-Aluminum-Silicate Solids Precipitation from the Build-Up of Non-Process Elements in Closed Cycle Kraft Pulp Mills / Chlorine and Potassium Balances: A Model Kraft Pulp Mill Study / The Adequate Level of Organic Substance Removal to Recycle Bleach Plant Effluents / Improving the Performance of an Aeration Basin by Implementing the Results of a Computer Model of Both Sections of the Aeration Basin / Restoration of Capacity to and Aeration Stabilization Basin Using Innovative Techniques / Aerated Stabilization Basin Improvement Study / Adapting and Available SO2 Monitor to Test for Miscellaneous TRS Sources Using a Portable System / Ambient TRS and SO2 Concentrations from a Bleached Kraft Mill with Advanced Emission Controls / Evaluation of Sulfur Source Emission Around The Wastewater Treatment of a Kraft Mill / Implementing Great Lakes Environmental Policy and Extendign in Elsewhere / Lessons Learned About Corporate Environmental Reports: Paper Industry Experience (Panel Discussion) / The Development of Compensatory Mitigation Wethands for Landfill Expansion / Health Risk Assessment of Contaminated Sediments / Suitability of Effluent Treatment Lagoon Solids as a Plant Growth Media

Call_No.:

• TP935.C667.6 1994

• The Chemistry and Physics of Coatings

• Marrion A. R.

• The Royla Society of Chemistry

• Economics and the Environment: The Role of Coatings / Volatil organics---Legisation and the Drive to Compliance / Markets for Coatings / The Rheology of Coatings / The Physics of Film Formation / Performance Properties of Coating / Coatings Polymers---Thermoplastic and Reactive Systems / Disperse Phase Polymers / Formulation of Coatings Compositions / Surface Coating --- the Future / Glossary

Call_No.:

• TP935.M9 1967 V.1 P.1

• Treatise on Coatings; Film-Forming Compositions

• Mayers, Raymond R., Long, James Scott

• New York, M. Dekker

• Acrylic Ester Emulsions and Water-Soluble Resins / Acrylic Ester Resins / Alkyd Resins / Asphalt and Asphalt Coatings / Chlorinated Rubber / Driers / Epoxy Resin Coatings / Hydrocarbon Resins and Polymers / Hydrocarbon Solvents / Natural Resins / Polyethers and Polyesters / Urethane Coatings / Vehicle Manufacturing Equipments

Call_No.:

• TP935.M9 1967 V.1 P.2

• Treatise on Coatings; Film-Forming Compositions

• Mayers, Raymond R., Long, James Scott

• New York, M. Dekker

• Styrene-Butadiene Latexes in Protective and Decorative Coatings / Starch Polymers and Their Use in Paper Coating / Cellulose Esters and Ethers / Drying Oils-Modifications and Use / Paint and Painting in Art / Rosin and Modified Rosins and Resins / Urea and Melamine Resins / Vinyl Resins / Vinyl Emulsions

Call_No.:

• TP935.M9 1967 V.1 P.3

• Treatise on Coatings; Film-Forming Compositions

• Mayers, Raymond R., Long, James Scott

• New York, M. Dekker

• Dimer Acids in Surface Coatings / Emulsion Technology / Phenolic Resins for Coatings / Plasticization of Coatings / Fatty Polyamides and Their Applications in Protective Coatings / Polycarbonate Resins / Reactive Polyesters / Varnishes / Reactive Silanes as Adhesion Promoters to Hydrophilic Surfaces / Surface-Active Agents / Shellac / Tall Oil in Surface Coatings / Silicones in Protective Coatings

Call_No.:

• TP935.M9 1969 V.2 P.1

• Teratise on Coatings; Characterization of Coatings:Physical Techniques

• Mayers, Raymond R., Long, James Scott

• New York, M. Dekker

• The Intrinsic Properties of Polymers / Surface Areas / Adhesion of Coatings / Mechanical Properties of Coatings / The Ultimate Tensile Properties of Paint Films / Gas Chromatography / Thermoanalytical Techniques / Microscopy in Coatings and Coating Ingredients / Radioactive Isotopes / Infrared Spectroscopy / Ultraviolet and Visible Spectorscopy / Color of Polymers and Pigments Systems / Photoelastic Coatings

Call_No.:

• TP967.A55.B1 1975

• Adhesion Science

• Comyn John

• The Royal Society of Chemistry

• Introduction to Adhesion and Adhesives / Surface Treatment for Adhesion, and for Abhesion / Primers and Coupling Agents / Chemistry of Adhesives which Harden by Chemical Reaction / Chemistry of Adhesives which Harden without Chemical Reaction / Pressure-Sensitive adhesives / Surface Analysis / Contact Angles in the Study of Adhesion / Streng of Adhesive Joints / Adhesive Joints and the Environment / Recommended Reading

Call_No.:

• TP968.A25 1954

• Adhesion and Adhesives, Fundamentals and Practice

• Parker, R. S. R. & Taylor P.

• New York, Wiley

• Introduction-AnHistorical Survey of Adhesives / The Nature of Adhesion / Surface Phenomena and Preparation / The Testing of Adhesives and The Design Adhesive Joints / The Chemistry and Physics of Polymers / Natural Products as Adhesives / Rubber Based Adhesives / Phenolic Resin Based Adhesives / Epoxy Resin Based Adhesives / Vinyl Resin Based Adhesives / Speciality Adhesives / Pressure Sensitive Adhesives / Adhesive Bonding of Reinforced Plastics / Matching Adhesives and Adherends

Call_No.:

• TP968.A765 1965 P.1

• Aspects of Adhesion. Part 1

• Alner, D. J.

• London; University of London Press

• Introduction / Strength and Structure / The Structure of Solid Surfaces / Pre-Treatment of Surfaces for Adhesive Bonding / Peeling Adhesion / High Temperature Adhesive / The Testing of Contact Adhesives used with Decorative Laminates / Adhesion in Textile Technology / Matches, Explosives and Propellants / Adhesion in Metal Finishing / Adhesion in Civil Engineering

Call_No.:

• TP968.A765 1965 P.3

• Aspects of Adhesion. Part 3

• Alner, D. J.

• London; University of London Press

• Introduction / The Chemistry of Adhesive Materials / Surface Energy and Adhesion in Lamella solids / Adhesive Bonds Under the Microscope / High Temperature Structural Adhesives / Rubber-Based Adhesives / Adhesives in the Timber Trades / The Problems of Adhesion in the Paint Industry / Some Factors involved in the Development of Adhesive Dental Filling Materials

Call_No.:

• TP968.A765 1969 P.5

• Aspects of Adhesion. Part 5

• Alner, D. J.

• London; University of London Press

• Theories of Adhesion Surveyed / Areview of Bond Testing Techniques / The Strength of a lap Joint / The Assessment of Structural bonds by destructive Methoeds / Some Methods of Non-Destructive Testing of Adhesive Joints / Adhesion in Electronics / Testing High-Performance Adhesives used in Footwear Manufacture / The Effect of Moisture on Adhesive Bonds / Bonding systems for Plastics / An Introduction to Surface Energy / The Significance of Surface Energy in Adhesion / the nature of Adhesive Forces / Glow Discharge Pretreatment of Polyethylene / Evaluating the Performance Qualityes of Gummed Paper Tape / Modern Developments in the Study of Interfaces / The Effect of Surface Conditions When Bonding with Expoxy Adhesives / the Morphology and Surface Energy of Polyethylene

Call_No.:

• TP968.A765 1969 P.6

• Aspects of Adhesion. Part 6

• Alner, D. J.

• London; University of London Press

• Thermal Effects in the Peeling Separation of an Adhesive System / Adhesion of Thin Metallic Films / Some Factors Affecting the Adhesion of Thin Metal Films / The Effect of Water on Aluminium-Expoxide Bonds / Mechanism of Failure of Adhesive Joints / Polymer Design in Relation to Adhesive Properties / The Effect of Surface Treatment on the Adhesion of and Organosol to Steel / Method and Meaning of Torsional Shear / Factors Affecting Peel Strength Between Polyethylene and Aluminium

Call_No.:

• TP968.K28 1971

• Adhesive Materials : Their Properties and Usage

• Katz, Irving

• Long Beach, Calif., Foster Pub. Co.

• Anatomy of Adhesive Bonding / Specification Technology / Paper and Fabric Adhesives / Wood Adhesives / Rubber Adhesives / Plastics Adhesives / Metal Adhesives / Packaging Adhesives / Electrical Adhesives / Optical Adhesives / Building Construction Adhesives / Other Adhesives : Pyrotechnic, Dental, Medical, Photographic, Foundry, Miscellaneous / Adhesive Properties Data / Notice to Reader / Specification Abstracts

Call_No.:

• TP968.K6 1952

• Adhesion for Wood

• Knight, Reginald Anthony Geoffrey

• New York, Chemical Pub. Co.,

• Introduction / Adhesives and their Usage / Glues of Natural Origin / Synthetic Resin Adhesives / The Purpose of Pressure in Gluing Operation / Influence of Moisture Content on the Gluing of Wood / The Gluing of Contaminated Wood Surfaces anf Preservative-treated Timber / Preparation of Surfaces for Gluing and the Casehardening Pheonomenon / An Outline of the Nature of the Adhesion in Glued Wood Joints / Acidity and Alkalinity / Temperature Penetration into Wood / The Permeability of Glue to Water / Identification of the Adhesive in a Glued Joint / Dermatitis and the Glue User / Moisture Content Relations of Wood / The Behaviour of Timber in Sheltered Environments / Conditions within Boats, Aircraft, Etc., in Service / Specification Tests for Glue / Testing Adhesives by Natural Exposure Methods / Accelerated Tests and Other Laboratory Methods / Classification of Glues According to their Durability The Bonding of Wood to Other Materials / Glossary of Special Terms

Call_No.:

• TP968.M18 1964

• Adhesive Raw Materials Handbook

• Mcguire, Edward Patrick

• Mountainside, N.J., Padric Pub

• Adhesive Bases / Plasticizers / Extenders and Fillers / Thickeners / Preservatives / Tackifiers / Defoamers / Wetting Agents / Humectants / Antioxidants / Softeners & Anti-Blocking Agents / Liquifiers / Crosslinking & Insolubilizing / Bleaches / Perfuming and Masking Agents / Dyes and Pigments / Solvents

Call_No.:

• TP968.M18 1967

• Adhesive Raw Materials Handbook

• McGuire, Edward Patrick

• Mountainside, N.J. , Padric Pub

• Adhesive Bases / Plasticizers / Extenders and Fillers / Thickeners / Preservatives / Tackifiers / Defoamers / Wetting Agents / Humectants / Antioxidants / Softeners & Anti-Blocking Agents / Liquifiers / Crosslinking & Insolubilizing / Bleaches / Perfuming and Masking Agents / Dyes and Pigments / Solvents

Call_No.:

• TP968.P38 1959

• Adhesive Bonding of Reinforced Plastics

• Perry, Henry Alexander.

• New York, McGraw-Hill

• Introduction / Mechanics of Adhesive Joints / The Statistical Point of View / Laminating Resins and Adhesives / The Rheology of Adhesives / General Properties of Adhesives / Mechanical Testing of Adhesives / Adherend Materials / Adhesive Bonding Process Factors / Adhesive Bonding Equipment / Ouality Control of Adhesive Bonds / Design of Adhesive Joints

Call_No.:

• TP968.P668.3 1967 V.1

• Treatise on Adhesion and Adhesives

• Patrick, Robert L.

• Marcel Dekker, Inc

• Introduction / Intermolecular and Interatomic Forces / Adsorption of Polymers / The Mechanisms of Adhesion / Role of Bulk Properties of the Adhesive / Rheology of Polymers Used as Adhesives / Fracture Mechanics Applied to Adhesive Systems / Variables and Interpretation of Some Destructive Cohesion and Adhesion Tests / Surface Chemistry

Call_No.:

• TP968.P668.3 1973 V.3

• Treatise on Adhesion and Adhesives

• Patrick, Robert L.

• Marcel Dekker, Inc

• Structural Adhesives for Metal Bonding / Durability of Adhesive Bonded Aluminum Joints / Adhesion and the Glassy State / The use of Scanning Electron Microscopy

Call_No.:

• TP968.S62 1943

• Synthetic Adhesives

• Smith, Paul Ignatius Slee

• Brooklyn, N.Y., Chemical Publishing Co., Inc.

• Dry Gluefilm, Phenol-Formaldehyde Resin / Phenol-Formaldehyde Liquid and Solid Glues / Urea-Formaldehyde Glues / Cellulose Adhesives Polyvinyl Cements / Acrylic Resin Cements / Chlorinated Rubber and Synthetic Ruber Cements / Miscellaneous Adhesives / Use of Synthetic Adhesives in the Manufacture of AeronAutical Improved Plywood and High-Density Woods / General Applications of Synthetic Adhesives in Industry

Call_No.:

• TS1105.C29 1952

• Pulp and Paper; Chemistry and Chemical Technology

• Casey, James P.

• New York, Interscience publishers

• Cellulose and Hemicellulose / Lignin / Pulpwood / Pulping / Bleaching / Fiber Preparation / Nature of Fiber Bonding / Sheet Formation / Filling and Loading / Internal Sizing / Surface Sizing / Wet Strength / Coloring / Microbiology / Water

Call_No.:

• TS1109 R.269 B1 1997

• Anthraquinone Pulping

• Goyal, Gopal C.

• TAPPI Press, Atlanta, GA.

• Low Kappa Pulping Without Capital Investment - Use of Anthraquinone for Low kappa Pulping / Extending the Digester Delignification with Anthraquinone / Tearing Resistance in Soda-AQ and Kraft Pulps / Low Sulfidity and Additive Cooking By Modified Batch (MB) Cooking / Anthraquinone - A Simple Approach for Extended Delignification in Conventional Kraft Pulping / Oxidative Pretreatment of Loblolly Pine with Alkaline Hydrogen Peroxide and Soda-AQ Pulping / Soda-AQ Pulping and the Tear Strength Problem / The Effects of Anthraquinone on the Reaction Rate of the Kraft Pulping of Northeastern White Pine / Kraft-Anthraquinone Pulping of Sawdust / Digester Operating Conditions and Pulp Quality in a Soda-AQ Pulp Mill / Studies on Kraft and Soda-Anthraquinone Pulping of Indian Mixed Hardwoods / Influence of Sulfite on the Effectivenes of Antraquinone in Soda Pulping / Comparisons of AS-AQ Pulping of Mixed Hardwoods and Pulping by the Conventional Kraft Process Substituting AQ for AA in Kraft Pulping / Soda Anthraquinone Pulping o Douglas Fir / The Interrelationship of Residual and Initial Alkali Concentrations for Kraft and Soda Pulping at Constant H-Factor / The Carbohydrate Composition of Soda-Additive Pulps / Delignification Rates of Alkaline-AQ Processes / The Influence of Low-Lignin Pulping Conditions on Bleachability: Effects of Anthraquinone and Effective Alkali Charge / Kinetics of Soda-Anthraquinone Delignification / The Interaction of Anthraquinone with Talol Oil Components / New Opportunities for In-Plant Reduction of Pollutants Through Process Changes / Would Anthraquinone be Economical in Your Pulp Mill / Effect of Sulfidity in Alkaline Pulping of White Spruce with Anthraquinone / Anthraquinone in Kraft Pulping / The Influence of Sulfidity on the Bleachability and Strength Properties of Alkaline-Anthraquinone Softwood Pulps / Kraft and Soda Pulping of Decayed Wetern Hemlock Using Anthraquinone / The Strengths of Draft-AQ (Anthraquinone) and Soda-AQ Pulps / Soda-Anthraquinone Pulping Of Hardwoods-Process Model / Kraft Pulping with Anthraquinone: Laboratory and Full-Scale Mill Trials / Quinone Additives in Soda Pulping of Hardwoods / Defining AQ Pulping Activity: Part 1-AQ vs. Sulfidity / Areview of New Alkaline-AQ Processes / Low - Sulfidity Kraft-Anthraquinone Pulping of Hardwood-Softwood Mixtures / Mill Experience with Kraft - Quinone Additive Pulping of Eucalytus in Batch Digester / Improved Kraft Pulping of White Spruce Bark-Wood Mixtures with Anthraquinone / Low-Lignin Pulping to Replace of Enhance Oxygen Bleaching / Evaluation of Kraft-AQ Pulping at Gardiner Mill (of International Paper Co.) / Anthraquinone Pulping; Fifteen Year After / Use of AQ-PS Pulping Additives for the Production of Linerboard Pulp / Anthraquinone and Polysulfide-Applicability for Use in Pulp Mill Operations / Sulfide Profiling for Increased Kraft Pulping Selectivity / Anthraquinone and Anthraquinone Polysulfide Pulping for Extended Digester Delignification

Call_No.:

• TS1109.C5.B3 1995

• 3rd Research Forum on Recycling

• Technical Association of the Pulp and Paper Industry

• TAPPI Press, Atlanta, GA.

• Detachment of Printing Ink from Different Types of Fibres / Analysis of the Accelerated Thermal Aging of Oil Ink Vehicles Using Isothermal Thermogravimetry / Effect of Air Volume and Air Bubble Size Distribution on Flotation in Injector Aerated Deinking Cell / Mechanisms of Pulp Loss in Flotation Deinking / Recycled-Paper Deinking Using Column Flotation / Adsorption and Entrapment of Calcium Soaps Using Packed Beds of Pulp Fibers / The Mechanism of Offset Ink Particles Agglomeration in a Calcium-Fatty Acid Collector System / The Effects and Behaviour of Different Types of Deinking Chemicals in the Deinking of Coated and Non-Coated Paper / Displacement Washing Deinking of Water-Based Inks / Some Factors Influencing Flexo Ink Calcium Soap Using Packed Beds of Pulp Fibers / The Mechanism of Offset Ink Particles Agglomeration in a Calcium-Fatty Acid Collector System / The Effects and Behaviour of Different Types of Deinking Chemicals in the Deinking of Coated and Non-Coated Paper / Displacement Washing Deinking of Water-Based Inks / Some Factors Influencing Flexo Ink Calcium Soap Particle Morphology in Flotation Deinking / A New Scheme to Analyze Deposits-Stickies from Mill Using Rcycled Fibre / High Magnification Image Analysis with Novel Background Reflectance Technique for Measuring Residual Ink in Sheets / Measurement of Deinked Pulp Quality and Deinking Efficiency - Part I - Impact of Specimen Preparation Procedures / Analysis of Stick-Slip Motion of Paper during Friction Testing / A Novel Use of the Formette Dynamique Sheet Former in Paper Recycling Research / Effect of Dispersion Variables on the Papermaking Properties of OCC / The Influence of Drying and Beating on the Swelling of Fines / Recycling Potential of Printed Thermomechanical Fibres for Newsprint / Effects of Multiple Drying Treatments on Kraft Fibre Walls / Enhancing Deinked Pulp Quality Through Low Consistency Refining / The Incidence of the Destabilisation of the Pulp Suspension on the Deposition of Secondary Stickies / White Water Chemistry-Influence on Flotation and Bleaching Effciency / Stickie Interactions in Fiber-Water Systems / Deinking of Toner-Printed Papers Part 1: Flotation Kinetics, Froth Stability and Fibre Entrainment / The Selective Removal of Toner Particles from Repulped Slurries by Flotation / Deinking Toner-Printed Paper by Selective Agglomeration / The Advantages of Combining Neutral and Alkaline Deinking / Short Sequence Recycling: The Factors Affecting Ink Agglomeration / Influence of Toner Detachment During Mixed Office Waste Paper Repulping on Flotation Effciency / High Brightness Bleaching of Mixed Office Waste

Call_No.:

• TS1109.C5.B4 1996

• Proceedings in Paper Physics - A Seminar

• Tappi Paper physics Committee

• TAPPI Press, Atlanta, GA.

• Paper Structure / The Paper Process / Characterization / Moisture and Paper / Mechanical Properties / Fracture Mechanics

Call_No.:

• TS1109.C5.B5 1998

• Proceedings: Economy & Ecology in Papermaking Technology

• The Finnish Pulp and Paper Research Institute

• The Finnish Paper Engineers Association

• Raw Materials / Developments in Papermaking Technology / Production Performance and Operational Aspects / Contraints Imposed by Society and Economics / Visions of the Futrue

Call_No.:

• TS1109.H33 1976

• Paper Coatings

• Harper, Donald T.

• Park ridge, N.J.: Noys Data Corp.,

• Introduction / Polyethylene and Ethylene Copolymers-Hot Melts / Polyvinylidene Chloride and Fluorocarbon Coatings / Water-Soluble Coatings / Styrene-Butadiene and Ethylene-Propylene Latexes / Vinyl Acetate Latexes / Acrylic Latexes / Silicones and Solvent-Based Coatings / Specialty Coatings

Call_No.:

• TS1109.T487 1963

• Paper Coating Additives

• Technical Association of the Pulp and Paper Industry

• New York, Technical Association of the Pulp and Paper Industry

• Foam Control / Lubricants / Wax Emulsions / Dispersants / Preservatives / Flow Modifiders / Insolubilizers / Polyviny1 Alcohol / Methy1 Cellulose and its Derivatives

Call_No.:

• TS1109.T4875 1966

• Paper Coating Pigments; A Project of the Coating Committee

• Technical Association of the Pulp and Paper Industry. Coating Committee.

• New York, Technical Association of the Pulp and Paper Industry

• Aluminas and Silicas / Barium Sulfate / Calcuim Carbonate / Clay / Colorants for Aqueous Mineral Coatings / Satin White / Titanium Pigments / Zinc Oxide and Zinc Sulfide (Lithopone) Pigments

Call_No.:

• TS1109.T488 1964

• Pigmented Coating Proceses for Paper and Board

• Technical Association of the Pulp and Paper Industry. Coating Committee

• New York, Technical Association of the Pulp and Paper Industry

• The Consolidated Coating Process / The Combined Locks Wet End Coating Process / Kimberly-Clark-Mead (KCM) Process / St. Regis (Faeber) Coater / The Champflex Coater / Gravure Coater / The Champion Machine Coating Process Air Doctor Coater / Trailing Blade Coating of Publication Grades / Size Press and Calender Treatment / Reverse Roll Coating / Ultrahigh Finish Coated Papers-Cast Coating and Other Processes / The Levelon Coater / Drying Coated Paper / The Dispersion of Pigments for Coating Color: Concept and Theory / The Effect of Mixing Intensity on the Dispersion of Coating Pigments in Water / Gelatinization and Dispersion of Starch aDhesives Used in Preparation of Pigmented Coatings / The Preparation of Casein and Isolated Soy Protein Coatings / Coating Kneader System / Coating Color Batch Prearation by Semi-Enclosed High-Speed Mills / Open Impeller Agitation Systems / Screenign of Paper Coatings / Pumps and Circulation Systems

Call_No.:

• TS1118.N1.B1 1966

• Coating Formulations: Principles and Practices

• Nadelman A.H. & Baldauf G.H.

• Lockwood Trade Journal Co.,Inc.

• Printing Methods Dictate Coating Formulations / What Coating Pgments Have in Common / Coating Adhesives---Their use in Formulations / Coloring Mateials for Coating Formulations / The ABC's of Coating Additives / What Formulators Need to Know About Color Preparation Systems / Colors Must be Formulated to Fit Application Equipment / Formulating Non-Pigmented and Low-Pig mented Opaque Coatings / Multiple Coating---the Status of the Art

Call_No.:

• TS1120.M38 1990

• Materials Interactions Relevant to the Pulp, Paper, and Wood Industries

• Caulfield, D. F., Passaretti J. D., Sobczynski S. F.

• Pittsburgh, PA.: Materials Research Society

• Wood and Polymer Composites / Fiber-Fiber Interactions / Fiber-Water Interactions / Papermaking and Coating Processes / Surface Interactions-Fillers and Pigments / Late Abstract Accepted

Call_No.:

• TS1135.B1 1998 B.2

• Forest Resources and Sustainable Management

• Kellomaki, Seppo

• Published in Cooperation with the Finnish Paper Engineers' Association and TAPPI,

• Introduction / Trees, Forests, and the Forest Ecosystems / Global Forest Resources / Structure and Properties of Wood and Woody Biomass/ Forest Inventory and Planning Management of Forest Ecosystems / Timber Procurement Timber Measurements / The Price of Timber / The Forest Sector and National Economy

Call_No.:

• TS1171.N6 1998

• 1998 TAPPI Proceedings: Breaking the Pulp Yield Barrier Symposium

• Technical Association of the Pulp and Paper Industry

• TAPPI Press, Atlanta, GA.

• Kraft Pulp Yield Basics / The Tride, the True, and the New-Getting More Pulp from Chips-Modifications to the Kraft Process for Increased Yield / Kraft SWD Yield: Break the Barriers / New Chipping Technique for Kraft Pulping / Genetically Engineering High Yield, High Quality Eucalyptus Wood Fiber / Kraft Cooking with Split Sulfidity - A Way to Break the Yield Barrier? / Possibilities to Increase the Pulp Yield in a Kraft Cook of ITC-Type / Achieving Major Increases in Hardwood Yield with Lo-Solids Cooking: A Study In progress / Improved Pulp Yield by Optimized Alkaline Profiles in kraft Delignification of Birch Wood / 1997 TAPPI Survey of Pulping Additives - AQ and Chip Penetrants / The Possibilities to Apply Polysulphide - AQ Pulping in Kraft Mills / Interaction Between AQ and Sulfidity on Yield and Pulp Strength in Kraft Cooking of Mixed Nortern Hardwoods / Boosting Pulp Yield of Western Softwood with Anthraquinone-Polysulfide Kraft Pulping / Methods to Measure Pulp Yield in Industrial Cooking Systems / The Correlation of COD and Yield in Chemical Pulp Bleaching / Mill Experieces Roundtable / High-Kappa Pulp and Extended Oxygen / Tugela Mill Oxygen Delignification for Unbleached Extensible Kraft / Improving the Pulp Yield by Using PS/AQ and /or Two Stage Oxygen Delignification / Use of Digester Additives and Oxygen Delignification to Gain Bleached Pulp Yield and Achieve Environmental Objectives / Full Chemical Pulping with Mixtures of Methanol and Acid Sulfite Liquors / High Yield and Easy Bleachability - The ASAM Process / The IDE-Process -A Way to Boost the Pulp Yield / High- Yield Alkaline Peroxide Chemi-mechanical Pulping of Northeastern Hardwoods

Call_No.:

• TS1171.T91.B1 1991 V.1

• 1992 TAPPI Technical Information Sheets

• TAPPI Press, Atlanta, GA.

• Coating and Graphic Arts / Polymers, Laminations, and Coatings

Call_No.:

• TS1175.M3.B1 1988

• The Sensing, Analysis and Simulation of Paper Formation

• Thierry M. Creeson

• State University of New York College of Environmental Science

• The Sensing of Paper Formation / The Analysis of Paper Formation / The Simulation of Paper Formation

Call_No.:

• TS1200.A2.B1 1997 V.A

• 83th Annual Meeting, V.A Technical Section Canadian Pulp and Paper Association

• Canadian Pulp and Paper Association.Woodlands Section

• Woodlands Section, The Canadian Pulp and Paper Association, Montreal, Quebec

• Improvement of Modeling D-Optimal Design Data with Neural Networks / Experimental Characteristics of Forming Fabrics and Fibre Mats / Contact Area Development in Three-Dimensional Models of Paper / Dilution Control Headbox - Choices, Threats and Solutions / Evaluating Paper Machine Operation - 1. Equipment and Operation / Comprehensive Modelling of a Calender Stack for Prediction of Offsets / Inhibition of Titanium Corrosion in Alkaline Hydrogen Peroxide Bleaching Environments / Electronic Customer Data Management System / Manufacture of No.5 Light-Weight Coated Using On-Line Film Press Coating and Soft-Nip Calendering - Experience from MacMillan Bloedel PM5 / The Adverse Role of Fibres During the Flotation of Flexographic Inks / Separation of Sulphide from Hydroxide in White Liquor by Electrodialysis / Solid Residues Generation and Management at Canadian Pulp and Paper Mills in 1994 and 1995 Start-Up and First Production Experience of Braviken PM 53 / Pressure Distribution Between Forming Fabrics in Blade Gap Formers: Blades of Finite Width and Fabrics of Finite Stiffness / Paper Waviness and Fibre Alignment Streaks in Paper Forming / Pulp and Paper Biosolids Dewatering: Why We Can Win the War with Water / Improved Newsprint Operation with a Bel Baie IV / Steam Drying: Benefits, Technology and Applications / Implementation and Benefits of Environmental Awareness Training / Moisture-Induced Surface Roughening During" Water Coating" of Precalendered Wood Containing Paper / Effect of Condebelt Press Drying on Sheet Structure and Properties / Results of the Technical Section, CPPA Machanical Maintenance Survey / Effect of DPTA on the Activated Sludge Treatment of TCF and ECF Kraft Pulping Effluents / Economic Evaluation of Black Liquor Treatment Processes for Incremental Kraft Pulp Production / An Apparatus for the Characterization of the Static and Dynamic Wetability of Complex Interfaces / Non-Contacting Infared Drying - Choice of Technology / No, It's Not a Single Row Spherical Roller Bearing / Accelerated Batch Cooking of Hardwood / Single-Fibre Pull-Out Tests and the Elmendorf Tear Strength of Paper / Paper Machine Dryer Can Balancing / Thermal Energy Recovery and Air Pollution Control in Pulp and Paper Mills / Rool Journal Cracking On Paper machines - A Review of the Problem / Lighting and Colour Temperature Effects / High- Density Fast-Response (HDF) Gas Infrared Drying - A New Level of Drying Performance / Direct Causticization of Kraft Black Liquor with TiO2 in a Fluidized Bed - Identification and Analysis of Sodium Titanates / Image Analysis: A Powerful Tool to Pinpoint Defects and Gauge Print Quality / Delignification Rate of White Birch Chips During Ethanol-Water Cooking In A Stirred Batch Reactor with Rapid Liquor Displacement / The New Concept for Pulp Sheet Formaers Based on the Twin Wire Press Principle / Development and Tessting of the ABB Dry Spout / Suction Rool Maintenance / Roller-Compacted Concrete for Economical and Durable Pavements / New Insights into Calender Barring Prevention / Modelling the Formation of Chlorinated Dioxins and Furans in a Chlorination Stage

Call_No.:

• TS1200.A2.B1 1997 V.B

• 83th Annual Meeting, V.B Technical Section Canadian Pulp and Paper Association

• Canadian Pulp and Paper Association.Woodlands Section

• Woodlands Section, The Canadian Pulp and Paper Association, Montreal, Quebec

• Paper Properties that Influence Ink Jet Printing / Evaluation of Ammounium Polyphosphate and Waste-Activated Sludge Extract as Nutrient Source for Activated Sludge System / Use of Distilled Tall Oil as a Flotation Collector in Deinking Mills / Wet-Web Properties and their Effect on Picking and Machine Runnability / Multivariate Analysis of TMP Mill Poeration Data / Now That's Mixing!!! ITT Flygt Mixers Help Abitibi-Price's Beaupre Mill Meet Effluents Regulations / Minimization of the Brightness Loss Due to Metal Ions in Process Water for Bleached Mechanical Pulps / Evaluation of Tow-Stage and Three-Stage Refining Processes for Production ot TMP Pulp for SCA+Paper / Brightness and Bleachability of Thermomechanical Pulp / Abitibi-Price - Island Falls Modernization and Frequency Conversion / One Filter for Continuous and Clean Wet End Liquids / Treds in Recycling; The Role of a Modern Pilot Plant / Effect of Shock Loads on the Activated Sludtge Treatments of BKME / A New Mini-Mill for High-Quality Recycled Linerboard / Mill-Site Demonstration of Optifloc Mixer for Flocculation of Pulp and Paper Mill Sludges / New Advancements in Chip Processing Technology Offer and Efficient and Practical Alternative to Chip Slicing / Improving the Efficiency of Internal and Surface Sizing Agents / Fibre Development in Thermomechanical Pulping: Comparison between Black Spruce and Jack Pine / The Naked Truth on hot Peroxide Bleaching / Wet-Web Strength of Hardwood Kraft Pulps / The Generator Acid Purification (GAP) System Reduces Caustic Make-Up Requirements at Kraft Mills / Effect of Water Jet Conditioning on Low Freeness Pulp at the Rauma Paper Mill / Just-in-Time Multimedia; Mass-producing Training for the Process Industry / Operation Results of a TNT Reel / Optimizing Conditions for Maxium Efficiency and Minimum Effluent Colour at Weyerhaeuser Grande Prairie / Process Characterization of High-Temperature Hydrogen Peroxide Bleaching: Caustic Addition / Papeuality Improvements on Conventional Calenders by Hot Calendering with Tandem Calcoils / The Modified Zeolite in Waste Paper Recycling / Refiner Autotransformer Motor Start / The Impact of Methanol-Based By-Products in Chlorine Dioxide Solution on Pulp Bleaching / The Role of Transition Metal Ions During Peracetic Acid Bleaching of Chemical Pulps / The Effect of Paper Machine Forming and Pressing on Offset Linting / Mill Experiences with Precipitated Calcium Carbonate (PCC) in Papers Containing Mechanical Pulp / Machine Diredtion Profiles of Stock Speed and Table Activity / Improved Chipper Performance / Lates Experiences of Online Charge Measurement - A process Control Concept / Complete Shear Rate Analysis Provides a New Means of Optimizing Coating Performance on High-Speed Coaters / A New Method of Estimating Print Quality / Intergrated Tool for Intelligent Identification of CD Process Alignment, Shrinkage and Dynamics / Managing Process Control for Results / Evaluation of Mortor Power Cables for PWM AC Drives / On-Line Chip Size Analysis - New Technology For an Improved Pulping Process / Process Quality Control in a Specialty Paper Mill / Multi-Ply coated Board Machine Optimized for Final Product Quality / Pitch Deposition in a Fine Paper Mill / Impingement Drying of Multi-Ply Linerboard / On the Determination of Paper Coating Coulurs Viscosity Using a Helical Ribbon Impeller / Energy Savings / What Supervisors and Engineers Need to Know about Fibre Optics / Operating Experience with a GAS-Heated Dryer at Willamette Industries / Roundtable on Mill Closure - Bleach Plant Issues (Abstract only) / Styrene Copolymer Latices: Meeting Tomorrow's Paper Coating Needs / A Case Study of the Use of Actual Controls in Simulation Trainers / Improved Technology for Dewatering of Low-Freenes Pulps / Controlling Filler Retention in Mechanical Grades / The Pulp and Paper Research Centre (CRPP) of UQTR and its Graduate Programs / Control of Foaming at the Size Press / Non-Thesis Master's of Engineering Programs for the Pulp and Paper industry / Continuous Paper Machine Monitoring the Key to Reducing Breaks / Field Trials and Emissions Testing of Paper De-inking Lolids (PDS) / A Case History of a Short Shutdown Drive Upgrade / A Case History of a Lineshaft Machine Drives Speedup / Weeping Phenomenon in Blade Coating / Modernizing the Paper Machine - Electric Drive and Control Options / A New Approach for Sheet Quality Assessment and Data Compression / Seasonal Variations at a Mechanical newsprint Mill / The Use of Scalewatcher Electronic Water Treatment in the Reduction of Scale in Pulp and Paper Applications

Call_No.:

• TS1200.A2.B1 1998 V.A

• 84th Annual Meeting, V.A Technical Section Canadian Pulp and Paper Association

• Canadian Pulp and Paper Association.Woodlands Section

• Woodlands Section, The Canadian Pulp and Paper Association, Montreal, Quebec

• Use of Tailored Minerals for the Treatment of a Model Thermomechanical Paper Mill Whitewater / Innovative Non-Contact Pump Technology for Hard-to-Pump Applicatio ns in the Pulp and Paper Industry, / Refiner Peroxide Bleaching at Daishowa Port Angeles / A Preminary Evaluation of the Use of Treated Mill Effluent in Hydrosulphite and Peroxide Bleaching of TMP / CPPA Oxygen Delignification Survey / The Darkening Reactions of TMP and BTMP during Alkaline Peroxide Bleaching / Sunds Defibrator's New Gard Screening Concept / The Critical Role of Transition Metals in High-Temperature Peroxide (PO) Bleaching / Electricity Deregulation - Managing a New Reality / Kraft Pulp Mill Emissions Treated by Regenerative Thermal Oxidation / Nondestructive Evaluation and Re-rating of Paper Machine Dryers / Experience with Peroxide Bleaching of High-Freeness CTMP / Winder Optimization - Roll Runnability Benchmarking Without the Pressroom / Improving Competitiveness of Newsprint Mill - Canadian Case / Project Life Cycle Benefits Realized Through Dynamic Process Simulation / Ion Exchange Technologies for the Minimum Effluent Kraft Mill / Using Reliability to Optimize your Process Control Expenditures / New Technique to Pelletize and Dry Pulp Sludge and Bark at Low Temperatures / Deconcentration Treatment for Corrugating Medium Papermaking Circuits: Target Zero Reject / Recycled Pulp Washing - Part 2 Optimum Washing Sub-System Selection For a Single-Loop ONP/OMG Deinking Plant / Beating and Refining Response of Some Reinforcement Pulps / Absolute Brightness Control in D Stages / Oxidized White Liquor as and Alkali Source in Kraft Hardwood and Softwood bleaching Sequences / Flotation Deinking Bubbles / Quantum Q-Owl Liquor Oxidizer / Engineering Assessment of System Closure Options for am Older Integrated Newsprint Mill / Integrated Measurement and Control on Coated Paper Machines / The Use of Fractionating Fractionating Filters to Increase Fibre Yield in Secondary Fibre Systems / The Modern Control Technology Supports the Payback of Advanced Solutions in Chemical Recovery Automation / Design Review of Biomass Bubbling Fluidized Bed Boilers / System Closure: A Canadian Perspective / Headbox Maintenace / Approach to Environmentally Friendly Papermaking / Professional Development in the Pulp and Paper Industry in Japan / Production Experience with Dynamic Jetflow F Coating Applicator / Flow-Accelerated Corrosion in Industrial Boiler Feedwater Systems / Data Collection and Reconciliation for Simulation of Operating Mills / software-Based Recovery Boiler Leak Detection / Bniowatch: A New and Unique Service for Advanced Biomanagement / System Closure in Integrated Newsprint Mills: R&D Issues / The EPA Cluster Rule - What are the Implications for Canadian Mills / Zeolite Microparticles in Flotation Deinking and its Effect on System Closure / The Practical Side of Newer Deposit Control Technologies / Combining Informal and Formal Trainning for Professional Development -The Role of a Technical Association (Abstract only) / Calendering of Groundwood Printing Papers Takes a Leap Forward / Pulp and Paper Research and Education at Polytechnique: A Growing Partnership / Life-Long Education and Training - An Investment or Costs? / Paper Strength - Paper Formation Relations / High-Yield Cooking, Oxygen Delignification and Ozone for Hight - Yield Bleached Pulp / Laboratory Strength Results of DZ Bleaching on a Variety of Pulps / A Modern Pulpmill with a Minimum Environmental Impact / Risk Management for Pulp, Paper and Packaging Producers / Importance of the First-Line Supervisor in Successfully Implementing Change in a Maintenace Estabilishment / The University of Toronto Pulp & Paper Centre Celebrates Ten Years of Partnership with Industry / Recovery Boiler Fireside Deposits Research at the University of Toronto / fibre Dimensions: Their Effect on Paper Properties & Required Masuring Accuracy / Reduction of Fresh-Water Consumption for Process and Non-Process Uses in an Integrated Newsprint Mill / Initial Learnings from the BFR Edmonstration / Professional Development and the Canadian Industry / Maintatining a Leading Competitive Edge Through Mill and Manufacturing Cooperation / Managing for Worle-Class Health and Safety: A Turnaround in the Pulp and Paper Industry / Applying the Quality Approach: Best Practices in Safety and Health Management / Identifyling the Full Costs of Injuries and Illnesses / Mill Closure: The Continuing Challenge

Call_No.:

• TS1200.A2.B1 1998 V.B

• 84th Annual Meeting, V.B Technical Section Canadian Pulp and Paper Association

• Canadian Pulp and Paper Association.Woodlands Section

• Woodlands Section, The Canadian Pulp and Paper Association, Montreal, Quebec

• The Use of Naturally Occurring Materials to Aid Pulp Mill Environmental Control / Cage Motors for Energy-Efficient Drives / Improving Extended Delignification Technology for Kraft Pulping. Part II Co-current Two-Stage Continuous Cooking / Requirements for SC Grades - An Overvies with Emphasis on Finishing / Development of Fines Quality in the TMP Process / Impact of a 32000hp Refiner Motor on Daishowa's Existing Power System and Equipment / Synergistic Effects of Kraft Pulping With Polysulphide and Anthraquinone on Pulp Yield Improvement / Evaluation of a Compressive Pretreatment Process on TMP Properties and Energy Requirements / Chemical Treatment in Mechanical Pulping Part 2: North American Aspen ( Process and Properties) / High-Speed Newsprint from 100% Recycled at PM14, Aylesford / Accumulation of Nonprocess Elements in Closed-Cycle Kraft Pulp Mills / Aerosol-Enhanced Flotation - A Possible Approach to Improved Flotation Deinking / Acidic Organosolv Pulping of Softwoods / Imaging Kraft Pulp Fibres in Air and Water By Atomic Force Microscopy / Evaluation of Depositable Pitch in Pulp Mill Filtrates / Studies on Odour Reduction in TCF Bleached Packaging Paper / The Potential Role of Perennial Grasses in the Pulp and Paper Industry / Switchgrass: A Potential Pulp Fibre Source / A New Approach to Solving the Problem of Overdried Paper Edges / Safety and Advanced Control System Design in Quebec Pulp and Paper Industries: A Practical and Industrial Integration Approach / The Fluid Mechanics of Medium-Consistency Stock Pumping in Pulp Mills / Two-Dimensional Simulation of Pressure Pulses in Blade Gap Formers / Progress in Reducing Effluent Acute Lethal Toxicity: A 1996 Survey / Improving Environmental Data Quality and Compliance wihtin an Environmental Management System / Evaluating Paper Machine Operation 2. Control and Instrumentation. Management Issues - Outsourcing and Self-Directed Teams / The Composition of Whitewater DCS During Retention Control with PEI and TMP and DIP / Paper Maker's Advisor / Domtar Papers' Land Application - Experience at Cornwall / Pulping of Canadian Industrial Hemp (Connabis Sativa L.) / V21 Bonded Pulpstone Trials at Abitibi-Consolidated, Fort Frances / Influence of Fibre Morphology and Chemical Composition on the Paper Making Potential of Kenaf Fibres / Use of Membrane Composites in Press Felts Enhance Pressing Efficiency / Characterization of the Collapse Behaviour of Papermaking Fibres Using Confocal Microscopy / Development of Structural Fibre Properties in High-Intensity Refining / Alkaline Peroxide Mechanical Pulping as a Novel Method to Make High - Yield and High - Brightness Pulp from Wheat Straw: Progress and Barrier / Fibre and Fibril Properties Versus Light Scattering and Surface Smoothness for Mechanical Pulps / Shoe Press Fabric Designs for Publication Grades / Maintaining the Brightness of Mechanical Pulps with Solid-State Perborate Bleching / Thermopulp - Recent Process Developments and Experiences / Rapid Md and CD Weight Control Utilizing a New Wet End Weight Measurement System / Recent Experiences with Consistency Profile Control Installations / Biotreatment of Resin Acids by the Coupled Anaerobic/ Aerobic Integrated System / New Technology to Apply Starch and Other Additives / Determination of the Papermaking Potential of Hybrid Larch: Lab-Scale and Mill Trials / Alternatives to Pulp Mill Sludge Land Filling / Increased Retention Aid Drainage and Controlling Stickies Deposition with Bentonite in Combination with Polyethylene Oxide and a Confactor - A Mill Experience / Venting the Shoe Press Nip / Primary and Secondary Sludge Composting: A Technico-Economical Study / Evaluation of High - Velocity Impingement Hoods Applied to Conventional Drying Cylinders / Towards Industrial Application of Bast Fibre Pulps / Analyse et Optimisation des Reseaux d'eau des Procedes des Papetiers / Improving Brown Stock Washing Efficiency Using CO2 to Acidify Post Oxygen Wash Press Filtrate / Benchmarking Energy Consumption and Identifying Opportunities for Conservation / Exploring the Value of Sludge / Agronomic Facts Pertaining to Industrial Hemp Fibre Production for Southern and Northwestern Ontario / Headbox Flow Analysis / Flow-Through Characterization of Mechanical Pulp Pads / LWC Production On-Line SCA-Ortviken PM4 / Clean Alternative Low-Cost Fuel / Screen Room Modernization / Wheat Straw, A Viable Fibre Source for Canada? / Accelerated Degradation of EDTA in and Activated Sludge Plant / The Use of Larch in the Canadian Pulp and Paper Industry / Decoloration D'effluents Papetiers Par / Oxygen-Based Bleaching of Dissolving Pulp / Annual Bast Fibre Plants as a Prospective Raw Material for the Pulp and Paper Industry / Status of Froest Sector Research and Development in Canada

Call_No.:

• TS718.D44 1970

• Adhesives for Metals: Theory and Technology

• DeLollis, Nicholas J.

• New York, Industrial Press

• Introduction / Theory of Adhesion and Mechanism for Bond Falilure / cleanliness and Surface Treatment of Metals / Joint Design test Specimens-Stress Relations / Adhesive Materials-Structural / Miscellaneous Adhesive Materials / Adhesive Sealants / Stress Relief, Vibration Isolation, and Vibration Damping / Industrial Processing of Adhesives and Bonded Assemblies / Industrial Applications / Conductive Adhesives

Call_No.:

• Z247.A5 1963

• Ink Technology for Printers and Students

• Apps, E. A.

• London, L Hill

• Flexographic Inks / Flexographic Ink Troubles / Screen Inks / Thermography / Xerography / Metallic Inks / Gloss Inks and Matt Inks / Gloss Finishing / Inks for Metal Decoration / Inks for Plastic Films, Foils and Difficult Surfaces / Fluorescent Inks / Printed Circuit Inks / Magnetic Inks / Ceramic Inks / Special Inks / Office Inks / Analysis of Printing Inks / The Structure of the British Printing Ink Industry