From: wa2ise@cbnewsb.cb.att.com (robert.f.casey)
Newsgroups: rec.radio.info
Subject: FT757 mod file  GX and GXII


copied from packet:

 Msg# TSF  Size #Rd  Date  Time From   MsgID        To
32969 BF   1796   0 13-Jan 1138 F1LOU  30523_ON7RC  YAESU@WW ()
 Sb: FT757GX and GXII MODS


                  YAESU FT757GX and GXII - TX 1,5 to 30 MHZ.
                  ==========================================

- Disconnect FT757 from all connections.

- Open tranceiver like explained in your "OPERATING MANUAL".

- Locate on the "CONTROL UNIT" SW03 and change its position.

- Close tranceiver back and reconnect power.

- This give you 100w between 1,5 and 30 mhz.


   73's de Phil, F1LOU @ ON7RC.BT.BEL.EU



------------------------------


Just after posting the article a friend of mine came in and he found
the unmarked switch on the upper main board near the display board and
under a bundle of wires.

1: remove the top cover
2: locate the small black switch that is located on the edge of the
   big horizontal board near the back of the main tuning dial.  The switch
   was under a bundle of wires.  You do not need to remove the metal cover
   from the board.
3: flip the switch.
4: replace the top cover.

Forrest Cook
cook@stout.atd.ucar.edu WB0RIO