SOFTPAQ NUMBER:  SP28542
PART NUMBER:  339081-002
FILE NAME:  SP28542.EXE
TITLE:  Systems ROMPaq Firmware Upgrade Diskette for HP ProLiant
        ML350 G4 Servers.

VERSION:  4.01A

LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  Systems

PRODUCTS AFFECTED:  HP ProLiant ML350 G4

OPERATING SYSTEM:  ALL

SYSTEM CONFIGURATION:  N/A

PREREQUISITE:  N/A

EFFECTIVE DATE:  October 4, 2004

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION: 2.X

SUPERSEDES:  SP28539

DESCRIPTION:   This release provides updated system ROM images
               for the latest maintenance releases of HP ProLiant
               ML350 G4 Servers.


New Features -


        ProLiant ML350 G4 ROM D17 (08/26/2004)
        ============================================

                Added support for RBSU option to allow configuring the 
		system for reduced processor power mode.  This feature 
		will reduce the core voltage and frequency of the 
		processors when enabled. This may be useful for customers
		whose environment has constrained power availability.
		
		Added support to allow the system to reclaim memory lost 
		to the PCI hole when the system is configured with more 
		than 4GB of memory. For these configurations, more memory 
		is made available to the operating system.

		Added support for new revisions of Intel chipsets.


           
Problems Fixed -


        ProLiant ML350 G4 ROM D17 (08/26/2004)
        ============================================

                Updated System ROM with the latest support code for Intel 
		Xeon Processors with 800 MHz System Bus. This works
		around an issue with the Intel Xeon processor that could 
		result in unexpected system behavior or a system hang.
	
		Updated System ROM to support System Maintenance Menu
		in Command Line Interface mode with the serial console
		session baud rate higher than 9600. 
		
		Updated System ROM to improve support for USB devices
		in a pre-boot environment.



HOW TO USE:

1.  Obtain a formatted 1.44 MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change to that directory.
The file that is downloaded is SP28542.EXE.

3.  From that drive and directory, execute the SoftPaq file:
SP28542 [ENTER]
You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to
create diskette.

4.  After the diskette is created, you may delete the downloaded file
SP28542.EXE if you wish.

Copyright 2004, Hewlett-Packard Company.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks of their
respective companies